FinHY Hydraulic directional Valves are manually controlled hydraulic directional control valve designed for distribution and control of work flow between generator (pump) and executive mechanisms (cylinder.hydro, motor.etc.)

They work in tandem with a hydrauLic pump, which converts mechanical power into fluid, or hydraulic power Hydraulic motors provide the force and supply the motion to move an extemalload.

These valves are a combination of a pilot operated relief valve and a solenoid operated directional valve.Piping between the two is eliminated as the solenoid valve is directly mounted on the relief valve and connected with the relief valve vent.

Disc coupling tubulardouble disc type, Bellows Coupling, Flexible coupling parallel clamp type, Jaw coupling.

With the swiveling inner ring, the spherical roller bearing offers excellent alignment error compensation. It has two rings with barrel-shaped rollers as rolling elements and can absorb very high radial and also axial forces.

These air coolers for hydraulic systems, these coolers are designed to handle high pressures, the oil cooler is installed in the main line of oil hydraulic system.It is very important to cool the hydraulic oil as high amount of heat is generated...

Seals or Rings are used in hydraulic cylinders for fluid sealing and are designed to ensure that pressurzied fluid does not leak across the cylinder head as the system pressure pushes the down the cylinder bore.

The common radial oil seals works by creating a thin layer of oil between the rubber sealing lip and the shaft which results in the oil lifting the sealing lip clear of the shaft.